Posts

Plumbing cabinet for float tank

Image
Finally finished with the making of four  12ft signs for neighborhood and working on the NEW DIY Sensory Deprivation Float Pod. Here is the plumbing cabinet completed except for doors and outside finish. The yellow pump is a magnetic drive pump and it pumps water from the lower float tank into the tall filter tube which is a triple capacity mechanical filter. From there it flows into a Balboa spa heater controlled by a controller with 1f accuracy.  Heated water then goes through an Ultraviolet light sterilizing unit and through a Venturi than adds ozone via corona discharge unit and finally back into the tank. The whole cabinet sits on top of the float tank so that any leak or system failure will drain directly back into the main tank without drama of flooding the room as happened in my old pod. I never want 900 lbs of Epsom salt with 150 gallons of water on my shop floor again :-)

Another view

Image

Float tank build continues

Image
SenDep tank still progressing.will complete insulation panels for the basin ( in this photo) in next 2 days. Then on to the cabinet :-) Module build requires a big more planning and better execution but it's keeping the project from seeming too daunting.

Plumbing platform

Image
---------- Forwarded message --------- From: Gary Overman < garyoverman.go@gmail.com > Date: Wed, Apr 22, 2020, 12:04 PM Subject: Plumbing platform To: GaryO-Blog < garyo1.garyoverman@blogger.com >, < garyoverman.go.mojo5913@blogger.com > Plumbing platform ready for mounting of:  1) pump, 2)  filter, 3) heater, 4) UV sanitizer , and 5) ozonator modules.

Plumbing platform

Plumbing platform ready for mounting of:  1) pump, 2)  filter, 3) heater, 4) UV sanitizer , and 5) ozonator modules.

Float pod basin.

Here's the float tank basin. The "legs" it's sitting on are temporary to get it up off the ground to a working height I can tolerate. The legs have casters to allow me to move it around . So far , so good! The gray is a high-tech rubber coating about 30mils thick. 

Float tank basin is ready for coating and liner.

Image
This tank is designed to be narrower than most. This allows the floater to center just by letting hands splay out enough to touch the sides and stop the movement side-to-side. On wide tanks the movement side-to-side can be quite a distraction waiting to be able to top the side and stop. This also provides a smaller foot print of tank and less water and salt to fill. I'm 6 ft and 220 and fit with plenty of room for comfortable use. Inside dim is. 88" x 39" x 13" deep for a 10"  water line.

Began work on new float tank

Image
These are the end pieces of the tank ready for side rails to be attached. 

Gibran- thought for today

Out of suffering have emerged the strongest souls; the most massive characters are seared with scars.

Testing a new recipe of cast stone for tiles

Image

Test gif post

Image

Hot air warmer

Image
Embossing gun is mounted on adjustable stand. It can be positioned anywhere at any angle. It's plugged into a momentary style foot switch that can be activated by foot , or as I prefer, by hand.  The momentary switch means it only runs when needed and when pedal is depressed. Removing foot or weight of my hand cuts it off. I like using my hand and I just rest the wax in hand under the nozzle while depressing the pedal. Moving to the work piece releases the pedal and I'm ready to go. It's pretty natural movement and wastes no time or effort.

Here's a great way to warm wax...

Image
40 watt old style bulb over a small cast iron skillet (5" square) . Board and skillet can be moved vertically to adjust heat. Skillet retains heat to keep wax uniformly and gently heated. Nice ambience as well.

Wax work setup.

Image
Added a 24" x 48" reclaimed wood work surface to lift cart. Mobile but heavy-duty. adjustable height. In center is hot air gun on adjustable post with LED gooseneck and hand/foot pedal control. Functional and looks pretty neat in person. 

Revision to hand powered sling caster

Image
Added wheel crank rather than bicycle style bar. Much easier to use and smooth in use. Not that other one was dangerous, but this seems better in that regard too.

Mold detail for spin casting

Image

Watch "Casting Machine Human powered- DIY made- low cost" on YouTube

https://youtu.be/FrML01NZbqI

Homemade simple casting machine

May you always be blessed

May you always be blessed with walls for the wind. A roof for the rain. A warm cup of tea by the fire. Laughter to cheer you. Those you love near you. And all that your heart might desire." Irish Proverb

Wax for upcoming fine silver casting test

Image